Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working after a few days it could be due to a dead coin battery, water damage and receiver module issues or a faulty electronic chip. These are all simple solutions and you'll be able to get your car back to speed in a matter of minutes!
The key blade may become worn out and result in an issue with your car key. It is easy to fix this issue by visiting your local Car Key Man Auto Locksmith to install a new blade.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become too weak to send an energizing signal to the car. The key fob might not function and stop you from locking or unlocking your doors or even starting the engine. You'll need a new battery for your key fob to correct this.
You can buy a brand new battery at an auto parts shop, or at your local hardware store. Make sure the battery is brand new and not sitting on the shelf too long. A fresh new battery will have greater capacity and will also be able to send a more powerful signal to the car.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors won't unlock, it's likely that the receiver module in the car is the cause. The local Peugeot dealer can reprogram the receiver module.
It's also possible that the chip inside your key fob is damaged. It's possible to damage your key fob if you drop it on the ground or expose it to water. Rubber seals that protect your chip from moisture might be worn out over time. This is especially the case if you expose your key fob to water for prolonged periods of time, for example, submerging it at the beach in the ocean. To prevent this from happening, it's important to keep your key fob away from moisture and to never let it come in contact with water.
Water Damage
Don't give up on your key fob if it gets wet, regardless of whether you slipped into the pool or stumbled into a pool. The key fob is protected by rubber seals however, prolonged exposure to water could harm its electronic chip. peugeot 207 replacement key G28 is a great conductor and any water that is absorbed into the key fob could cause short circuits in series which eventually damage the electronic chip. After removing the batteries clean the contact surfaces with isopropyl. Dry them completely before putting them back in.
Your Peugeot 308 may not start due to the battery being dead. Jumper cables can be a great way to restart the engine in case you have an extra car. If the battery is defective the battery must be replaced.
A defective receiver in your car could also block it from receiving the signal from the key fob. It could be a issue with the antenna or wiring, or the key fob might be damaged. It could be necessary to program a new fob into your vehicle if you are using one. If you are unable solve the issue yourself then contact an expert technician. A skilled technician will be able determine the issue quickly and correct it swiftly.
Radio Interference
For example, a key fobs that are not recognized or with a limited range typically indicate that there is a problem with the system. The interference could be radiated or transmitted, the latter being caused by power cables and speaker cables being too close to electrical components. In general, rerouting cables or moving them away from these components can solve the problem.
It's unlikely that someone is listening to the key fob's signal in order to steal your vehicle however it is possible that radio frequency interference has drowned out the signal. This is an easy issue to repair.
If your key fob isn't being recognized by the system, try a new battery. Also, ensure that the battery you are using is the right type and size. If the battery is not properly sized, it could damage the fob.
Some aftermarket alarm systems and radar detectors operate on the same radio frequency as your key fob and can cause them to interfere with your key signals. It is advised to avoid having these devices attached to your key fob.
Pairing Issues
The remote keyless entry system is a receiver that receives radio frequency signals from the key fob. If the receiver is experiencing an issue, you will not be capable of starting your car regardless of whether the key fob functions and can be reprogrammed. This problem can be caused by a variety of ways, including an inoperative battery on the coin-cell or water damage. The receiver could also be malfunctioning due to a software error or internal damage to the key.
The battery that powers your Peugeot 308 keyfob has likely died. This battery can be replaced, but you must make sure that it is the right battery for your keyfob. A bad battery can lead to further problems with the key fob, so it is best to choose the original battery or the replacement that is identical in size, voltage and specification.
Another reason that your Peugeot 308 key fob might not be working is due to the fact that it is paired with another vehicle. This could happen if you have given your key fob to someone else or if the key has been used to unlock or start other vehicles. This can be solved by reprogramming your key fob with an OBDII scan. The tool will ask you for information about your car, for example, its VIN or engine type. It is important that you enter the correct details.